Water Filtration System Installation in Denver, CO
A filter has to match what you want the water to do: taste and odour, chlorine, or sediment. It does not soften water, and that distinction matters before you buy, because softening and filtering are different systems.
Service overview
Taste, chlorine, or sediment: match the filter to the job
Water filtration system installation in Denver means fitting a system that targets taste, odour, chlorine, or sediment in the household water, and the work starts with what you want the water to do. A whole-house carbon filter treats every tap and is the usual answer for chlorine taste and odour. A sediment filter takes out grit before it reaches the rest of the system. A point-of-use reverse osmosis unit under the kitchen sink treats drinking water only, and it is a different product from a whole-house filter. None of these removes hardness: a filter does not soften water, and a household that wants soft water needs a softener, which is a different system. We talk through the options before anything is fitted, so the system you get matches the job you want done.
! Problems we solve
What do you want the water to do
Taste and odour, chlorine, or sediment each point at a different filter. We start from the job, not from a catalogue.
Whole-house or point-of-use
A whole-house carbon filter treats every tap. A reverse osmosis unit under the kitchen sink treats drinking water only. They are different products.
Where the filter will sit
A whole-house filter needs space on the main supply, a drain, and access for cartridge changes. The location shapes the install from the start.
Scope of work
What a water filtration installation includes
A filtration installation is a planned job with a water discussion, a system choice, and a full test at the end. Here is what it covers.
-
01
Water discussion and system choice
We talk through what you want the water to do, and confirm whether a whole-house carbon filter, a sediment filter, or a point-of-use reverse osmosis unit is the right answer.
-
02
Location and plumbing
The system is plumbed into the main supply or under the kitchen sink, with a bypass valve, a drain where needed, and access for cartridge changes.
-
03
Filter and membrane fitting
The filter housings, cartridges, and membrane are fitted, and the system is flushed so the first water through it runs clear.
-
04
Testing and walkthrough
We test the water, check every connection for leaks, and show you how to change the cartridges and what the change interval looks like.
Filtering is not softening, and we say so
A filter targets taste, odour, chlorine, and sediment. It does not remove hardness, and a household that wants soft water needs a softener, which is a different system. We say this before the install, because a filter bought to fix hardness is the wrong purchase, and a softener bought to fix taste is too.
Call (720) 599-7253Tools and methods we use
Water testing
Tests the supply so the system is chosen from your water rather than from a guess about what is in it.
Bypass and drain fitting
Plumbs the system with a bypass valve and a proper drain, so cartridges can be changed without shutting off the house.
Filter housing tools
Fits the housings and cartridges so they seal properly and can be opened again for the next change.
Leak and flow testing
Checks every connection and confirms the flow is right, so the system works as designed from the first use.
Local execution
Filtration installs in Denver follow what households notice about their water. In Cherry Creek and Washington Park, remodelled kitchens often add a reverse osmosis unit under the sink for drinking water, and the drain and space under the sink have to be planned around it. In Highland and University Park, whole-house carbon filters go in with the water heater in the utility area, where the main supply, a drain, and cartridge access are all in one place. Denver Water reports hardness of about 89–105 mg/L (5.2–6.1 gpg), and that hardness is a softener's job, not a filter's, which is why we keep the two systems distinct.
What Denver water asks of a filter
What to tell us when you call
Thinking about water filtration? Call to discuss it
What to do while you plan
A filtration installation is a planned job, and the system choice is easier when it is not rushed. Call (720) 599-7253, describe the water and what you want it to do, and we will confirm availability when you call. If you are also weighing a softener, tell us, because filtering and softening are different systems and the right answer depends on what you want the water to do.
What to expect from your water filtration system installation in Denver
Call and describe the water
Call (720) 599-7253 and tell us what you notice about the water and whether you want every tap treated or just the kitchen tap. We set a time that fits your day.
System choice and location
We talk through the filter options, confirm whether a whole-house or point-of-use system fits, and check the location for a drain and cartridge access.
Installation and testing
The system is plumbed in with a bypass, flushed, and the water is tested before we leave, with the cartridge change interval explained.
What shapes the cost of water filtration installation in Denver
A filtration installation has no published price: the system, the location and the plumbing at the site set the scope. We talk through what the install involves before any work starts, so you can decide with the facts in front of you.
System type
A whole-house carbon filter and a point-of-use reverse osmosis unit are different systems with different plumbing, and the type sets much of the scope.
Location and plumbing
A utility area with a drain nearby is simpler to fit than a kitchen sink with no drain access, and the site decides the work.
Cartridge and membrane setup
The housings, cartridges, and membrane have to be fitted so they seal and can be changed again, and the setup shapes the scope of the job.
Before any work starts
Frequently asked questions
Will a water filter soften my water?
No — a filter does not soften water. It targets taste, odour, chlorine and sediment; hardness passes straight through. A household that wants soft water needs a softener, which is a different system, and our softener page covers it.
What is the difference between whole-house and point-of-use filtration?
A whole-house carbon filter treats every tap in the home. A point-of-use reverse osmosis unit under the kitchen sink treats drinking water only. They are different products for different jobs.
Does filtered water need a drain?
A reverse osmosis unit does: it sends a stream of water to drain as part of how it works. A whole-house carbon filter does not need a drain in the same way, and we plan the plumbing around the system chosen.
Does a new filter system need a permit in Denver?
Fitting a filter on the household supply, without changing the main layout, is generally exempt from a permit under the Denver Building Code. Reworking the main supply layout can trigger one, and we will tell you if the job you have in mind crosses that line.
Related services
Water Softener Installation
If hardness is the concern, the softener page covers salt-based ion exchange sizing and what softening does and does not do.
Water Filtration System Repair
If you already have a filter that is not working, the repair page covers cartridges, membranes, and flow problems.
Water taste or chlorine in Denver? Call us
Call (720) 599-7253 and tell us what you notice about your water. We will confirm availability and talk through the filter options for your home.